Enscape hillside house render with concrete walls, Corten steel fascia, and green roof set into a grassy slope among trees.

© Chaos 3D Team

Samir Mujovi

Samir Mujovi

Last updated: October 14, 2026  •  6 min read

Designing The Line House: An Enscape Project Breakdown

Samir Mujovi is an architect and 3D artist at Chaos, where he creates the projects featured in Enscape release campaigns and marketing materials. In this article, he explains how he designed The Line House, the project he created for an Enscape release earlier this year.

 

When working on conceptual projects without a real client or a specific physical site, the blank page can be really scary. I was tasked to create a project for an Enscape release, which was going to be featured in the marketing materials.

The input that I got was: let's create something that is simple, yet relatable and inspiring for other architects. I’m not sure how much I will succeed in that, but I wanted to share my design process of creating The Line House project that you can see on our website and social media channels.

Here's an overview of what this article covers:

  • Guided by References: How analyzing real-world architectural examples shapes the design process.

  • The Power of Constraints: How establishing project constraints helps you conquer the "blank page."

  • Building Structure: Why resolving the underlying structural logic naturally guides your design decisions.

  • Adding a "Manual" 3D Touch: When and why you should decide to model something manually.

 

See the final results of the project in this video

Inspiration and constraints

The first step, as always, was searching for inspiration. After checking a lot of references, I decided to go for a villa-style building situated remotely in a dense forest. To make the project feel “real” I tried to mimic the work of an actual architect, at least to a certain extent. This meant I needed to create my own real-world constraints (at least the physical ones, since I could luckily ignore a client's wishes or a tight budget 😛).

So, I decided that the primary physical constraint would be the topography itself: sloped terrain that would dictate how the building sits in the environment. Then, to give the site a sense of history, I imagined that a structure had existed there previously, but only the concrete walls remained, and my task was to design the new home around them. That became my starting point: a sloped terrain in a forest anchored by existing concrete walls.

Axonometric site diagram of existing walls on sloped terrain with contour lines and elevation markings.

References:

The concept: One Line

I named the project ‘The Line House’ because the initial plan was to organize everything along a single axis, where the flow of the inner spaces would mirror the progression of a day—from the moment you arrive at the house to the time you go to sleep.

As the design evolved, I realized that keeping the entire house in one unbroken mass wouldn't do justice to the site. So, I decided to split that continuous line into three distinct volumes. While the largest main living spaces still follow that primary linear axis, the two secondary volumes utilize the sloped terrain to break the massing into varying elevations.

This stepping of the volumes does two crucial things for the composition: it prevents the building from feeling like a monolithic block dropped onto the landscape, and it creates a rhythmic, dynamic silhouette that naturally nestles into the topography.

Design concept diagram, step 2: a straight line drawn through the existing walls on sloped terrain Design concept diagram, step 3: a long volume along the line, split into three parts Design concept diagram, step 4: the two end volumes separated from the main volume on the slope Design concept diagram, step 4: the two end volumes separated from the main volume on the slope Design concept diagram, step 6: end volumes reshaped and shifted to follow the terrain's contours

Structure

I believe that resolving the structural logic of a building makes the entire project feel more believable, even if the framework is ultimately hidden. As with any project, I always aim to make the structure at least conceptually sound. Of course, if I asked my father—who is a structural engineer—to verify it, he’d probably slap a few columns right in the middle of the living room 😛.

To keep things simple, I utilized the 'existing' concrete walls as the primary support for a new metal framework. By using various steel profiles for the columns and beams, I was able to bridge the open spaces between the concrete walls and properly support the green roof and wooden ceiling above.

Structure_00: Structural diagram: existing walls arranged along sloped terrain with contour lines, before new construction Structure_01: Structural diagram: primary frame of the three building volumes between existing walls on sloped terrain Structure_02: Structural diagram: secondary roof beams added over the primary frame of the three building volumes Structure_03: Structural diagram: tertiary framing with roof joists and wall studs added to the building structure Structure_05: Structural diagram: non-structural elements added, including roofs, glazing, and stairs linking the volumes

Architecture

The experience of the house is designed as a journey. You arrive at the highest, smallest volume by car along a forest road, entering the building through the garage. From there, you are intentionally forced to step back outside, walking down a set of exterior stairs before entering the main volume of the house. That way, you feel the temperature, hear the wind, and get the feeling that you arrived on foot.

Once inside the main volume, the linear journey resumes. You walk in a straight line past the pool area, through the kitchen and dining spaces, past the bathroom and kids' room, finally arriving at the master bedroom.

However, before reaching the master suite, the path offers one final split. A secondary path leads you back outside and down another set of stairs to the third volume; a secluded guest house featuring two separate master bedrooms, giving visitors their own private slice of the forest.

And what would a forest house be without an outdoor seating area to actually enjoy the outdoors? This space serves as a central hub. It connects directly to the main volume of the house by a path above the pool, while also stepping down the sloped terrain to link up with the guest house.

Axonometric floor plan of a hillside house with garage, living room, pool, bedrooms, and guest house on contours.

Materials

Since the raw, heavy concrete was already established as the base, the new architectural additions needed to provide a clear material contrast. References played a big part in my decision-making, ultimately leading me to choose black timber cladding for the new volumes. Along the roofline, I added a band of weathered steel; it brings an earthy tone to the facade, but more importantly, it’s housing the sunshade devices. Those sunshades are essential for covering the large, floor-to-ceiling glass windows and managing the light.

Enscape render of a facade detail with Corten steel roof edge, dark vertical timber cladding, and steel-framed glazing with curtains.
Enscape interior render of a parametric wavy wood slat wall lit by a floor lamp beside an armchair.

Interior

Moving inside, the material palette continues this functional approach with a focus on contrast, and of course, references played a big part here as well. I used a wooden ceiling throughout the main spaces to bring warmth and seamlessly integrate the linear lighting tracks. Additionally, the bright wooden floor features a custom geometric pattern, which adds a necessary layer of texture and breaks up the strict straight lines of the architecture.

The overall interior design leans into darker tones, particularly in the kitchen area, where I used dark cabinetry and deep wall finishes. These are balanced by the earthy tones of the kitchen island and white curtains.

Enscape render of a dark living room render with textured plaster wall, brass table lamp, sofa, and blinds framing a hillside view.
Enscape kitchen render with dark island, steel range hood, pendant lights, wood ceiling, and floor-to-ceiling windows.

3D fun

I know, I know, everything can be generated nowadays. But sometimes, to get exactly what you have in mind, it's actually quicker and far less annoying to just model it manually. For example, the designer pendant lamps: structurally, it’s basically a triangle with rounded corners that you extrude a few times, add some supporting edge loops, and throw a SubD modifier on. The rest is just extruded circles.

Another fun element was the kitchen island, which I envisioned as a raw block of stone with one section carved out. I played around with the sculpting tools in Blender, and even though I probably broke all sculpting rules 😛, I managed to create something I liked pretty fast. Finally, these custom pieces are brought into Enscape using the Custom Asset Library. I rely on this workflow often for terrains, roads, bespoke furniture, or anything else that demands that specific '3D artist touch'.

Final steps

Once the modeling and materials are dialed in, the only thing left is finding the right camera positions, and the right lighting, to capture the essence of the building's design. Even during the initial conceptual phase, I’m always keeping an eye out for interesting compositions and lighting scenarios. However, it’s really only after you apply the final materials and populate the scene with assets that you can confidently say, 'Yes, this is going to be a good shot.

Front exterior render of a house with board-formed concrete wall, Corten fascia, and dark timber cladding by trees Foggy exterior render of a long house with board-formed concrete walls, dark cladding, and floor-to-ceiling glazing Close-up render of a black steel beam crossing a Corten roof fascia above dark cladding and glazing Kitchen render with dark cabinets, brass handles, island, pendant light, and a sunlit hallway with tall windows Close-up kitchen render of textured dark cabinets with brass handles beside sheer curtains and tall windows

At that point, I consider my part of the job complete. Other members of my Chaos 3D team then take over, bringing the project to life, producing high-end, photorealistic 3D rendered images and videos using Envision, V-Ray, Veras, and other tools.

You can check out the final results in the video shared at the beginning of this article.

 

ℹ️ This article was originally published on CGconnect.

Ready to try Chaos products?

Start your free trial today and explore all features.

Share
Samir Mujovi
Samir Mujovi

Samir is an architect and 3D artist, currently part of Chaos 3D team. With a background in BIM, Rhino, and parametric design, he is passionate about using technology to transform architectural ideas into compelling visual experiences. His work combines technical expertise with a strong focus on composition, storytelling, and visual communication.

Axonometric site diagram of existing walls on sloped terrain with contour lines and elevation markings.
Design concept diagram, step 2: a straight line drawn through the existing walls on sloped terrain

Image 1 from 6:

Design concept diagram, step 3: a long volume along the line, split into three parts

Image 2 from 6:

Design concept diagram, step 4: the two end volumes separated from the main volume on the slope

Image 3 from 6:

Design concept diagram, step 4: the two end volumes separated from the main volume on the slope

Image 4 from 6:

Design concept diagram, step 6: end volumes reshaped and shifted to follow the terrain's contours

Image 5 from 6:

Image 6 from 6:

Structure_00: Structural diagram: existing walls arranged along sloped terrain with contour lines, before new construction

Image 1 from 5:

Structure_01: Structural diagram: primary frame of the three building volumes between existing walls on sloped terrain

Image 2 from 5:

Structure_02: Structural diagram: secondary roof beams added over the primary frame of the three building volumes

Image 3 from 5:

Structure_03: Structural diagram: tertiary framing with roof joists and wall studs added to the building structure

Image 4 from 5:

Structure_05: Structural diagram: non-structural elements added, including roofs, glazing, and stairs linking the volumes

Image 5 from 5:

Axonometric floor plan of a hillside house with garage, living room, pool, bedrooms, and guest house on contours.
Enscape render of a facade detail with Corten steel roof edge, dark vertical timber cladding, and steel-framed glazing with curtains.
Enscape interior render of a parametric wavy wood slat wall lit by a floor lamp beside an armchair.
Enscape render of a dark living room render with textured plaster wall, brass table lamp, sofa, and blinds framing a hillside view.
Enscape kitchen render with dark island, steel range hood, pendant lights, wood ceiling, and floor-to-ceiling windows.
Front exterior render of a house with board-formed concrete wall, Corten fascia, and dark timber cladding by trees

Image 1 from 5:

Foggy exterior render of a long house with board-formed concrete walls, dark cladding, and floor-to-ceiling glazing

Image 2 from 5:

Close-up render of a black steel beam crossing a Corten roof fascia above dark cladding and glazing

Image 3 from 5:

Kitchen render with dark cabinets, brass handles, island, pendant light, and a sunlit hallway with tall windows

Image 4 from 5:

Close-up kitchen render of textured dark cabinets with brass handles beside sheer curtains and tall windows

Image 5 from 5: